
Opal Turret Slitter Rewinder
ASHE’s Opal Turret Slitter rewinder can be set to run at a given length or number of labels, and it will then cut and transfer the web without stopping. Each turret slitter rewinder can run light or high tension para permitir un mayor variedad de materiales to run on one machine.

Consulta
If you are interested in finding out more about our products, please fill out the following form and a member of our team will be in touch with you soon.
OpalRebobinadora de torreta para etiquetas de banda estrecha en línea y fuera de línea
The Opal range of glueless turret slitter rewinders is in a class of its own. The benefit of these turret slitter rewinders is that the changeover from one set job to the next is automatic and can be completed within minutes. This saves hours in lost setup times as the turret slitter rewinders can continuously run, having only to stop when the master roll needs replacing or the printing process stops.
ASHE has a patented solution for starting on a new core at speed without the need to apply glue or tape to it. Our cinch mechanism allows this to happen at speed and gives a perfect, tuck-and-fold-free start onto the new incoming core. In addition to this operation, the finished rolls can also be closed with a label (plain or printed) to give a fast, clean and safe way of producing finished rolls in the fastest time possible.
- Características
- Especificaciones
- Galería
- Vídeo
- Folleto
- Fully automatic four-spindle glueless turret rewinder
- No hay tiempos de cambio (salvo el cambio de eje de rebobinado)
- Can run inline with existing processes, such as printing presses or die cutting units, or be a totally separate offline operation
- Full servo operation with one servo motor on each rewind shaft
- Funcionamiento limpio y seguro, sin cola caliente en la máquina
- Integración de los sistemas de inspección por cámara 100%
- Cost-saving benefits with no glue costs and energy saving, as no glue to heat
- A full shaft support mechanism is available on small cores so that shafts remain fully supported throughout the turret cycle and run operation
- Disponible con varias instalaciones de carga automática de núcleos para reducir la participación del operador y ahorrar más tiempo
- Sistema de expulsión automática de rollos
- Slitting station available with rotary shear, razor, or crush slitting
- Guía completa de ASHE disponible
- Sistema patentado sin cola para aplicar sobre el núcleo entrante a velocidades de 150 m/min.
- Label applicator for closing of finished rolls, which can also be linked to thermal printers
- Easy lock/unlock, adjustable rewind shafts to run sizes of rewind core between 19mm and 102mm
- Control de la longitud (metros o pies) y del número de etiquetas
- Interlabel cutting is possible
- Opciones de desbobinado con desbobinado integral o desbobinado separado para diámetros de bobina mayores
Ancho del material | 340mm (13″) 440mm (17″) 540mm (21″) 600mm(24″) |
Diámetro máximo de rebobinado | 400mm (16″) 600mm (24″) |
Velocidad de la máquina | 230m/min (755ft/min) |
Velocidad de corte y transferencia | 150m/min (492ft/min) en tamaños de núcleo de 40 mm y superiores |
Materiales a ejecutar | Materiales PS de papel y película |
Operación | Servo AC directo con pantalla táctil HMI |

Descargue este folleto en formato PDF:
Equipos de acabado para las industrias de etiquetas y de banda estrechaRebobinadora de torreta de banda estrecha en línea y fuera de líneaCaracterísticas principales
Pregunte por el rebobinador de torreta Opal
Descubra por qué nuestros clientes nos eligen para sus cortadoras rebobinadoras y maquinaria de conversión.

Consulta
If you are interested in finding out more about our products, please fill out the following form and a member of our team will be in touch with you soon.
